Antech's Electrical Calibration Laboratory
Antech's UKAS electrical calibration laboratory caters for all types of general purpose electrical instruments across a wide range of industries.
The wide range of equipment covered falls into the following categories: -
- Analogue/Digital Multi-meters, Oscilloscopes, Resistors
- Clip-on Ammeters, Power Supplies, Stop Watches
- Frequency Timer/Counters, Potentiometers, Tachometers
- Insulation Testers, Resistance Boxes, Temperature Indicators
- Low Resistance Meters, Voltage References, Shunts
- Oscillators and Signal Generators
All with certification, and within the following parameters:-
Electrical Parameters
- DC Voltage 0 to 60 kV
- DC Current 0 to 2000 Amps, 0 to 100 Amps source simulated above 100 Amps, 2 to 2000 Amps Simulated.
- AC Voltage 0 to 1100 V @ 10 Hz to 1 MHz. 0 to 50 kV peak @ 50 Hz
- AC Current 0 to 2000 Amps, 0 to 100 Amps source simulated above 100 Amps, 2 to 2000 Amps Simulated @ 40 to 60 Hz
- Frequency Measurement & Generation DC to 1.2 GHz
- Time 0.1s to 1 Hour, Hand Held Stopwatch
- Phase angle 0.1° to 359.9°, -180.0° to + 180.0°
- DC Resistance 0Ω to 100 GΩ
- AC Resistance 1 mΩ to 10 kΩ
- Capacitance Measured 1 pF to 100 mF & Generated 50 pF to 1 μF @ 100 Hz to 100 kHz
- Inductance Measured 0.1 mH to 30 kHz & Generated 0.1 mH to 1 H @ 100 Hz to 100 kHz
Accelerometry Parameters
- Frequency Step 10 Hz to 50 kHz
- Amplitude 0.1 gn to 10 gn
If you have any queries please contact to discuss your requirements.
